Ut-King Fiber Optic Receiver with CATV Mini Node Products Nodo Receptor FTTH Receptor Optico

• Type: Xpon ONU
• Certification: CE, ISO, RoHS
• Condition: New
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: OPC05
• Product Type: FTTH Optical Receiver, AGC FTTH Optical Receiver
• Wavelength: 1260-1600nm
• Application: Fttp,FTTH,Fttn
• Connector Type: Sc/APC
• CATV Operation Wavelength: 1540~1560
• Transport Package: 1 PCS 1 Box 20 PCS 1 Carton
• Specification: 155mm x 92mm x 34mm
• Trademark: UT-King
• Origin: Guangdong

Product Description

UT-King  Fiber Optic Receiver with Catv Mini Node Products Nodo Receptor FTTH Receptor Optico

                   Fiber to the home ( FTTH ) broadband access is the ultimate development goal, VR-860WMC optical receiver is the target terminal products for this goal. This device adopts technology of high isolation WDM in order to separate CATV and ONU signal. Further more, it also adopts low optical power receiving and RF-AGC control technique, which could achieve the requirement of ≤-9dBmCATV receiving for FTTH. The optical power receiving monitoring indicator LED ( ≥-15dBm) is provided on the pane and it supports RF outputs constantly , convenience of customers use, which is the ideal receiver equipment for FTTH.

Specification:

Item		Unit	Performance Parameter
Optical  characteristic	input wavelength	(nm)	1310,1490,1550
	Output wavelength	(nm)	0,1490
	CATV operation wavelength	(nm)	1540~1560
	channel separation	(dB)	≥40(1310/1490nm and 1550nm)
	response	(A/W)	≥0.9
	receive power range	(dB)	+3~-18
	reflection loss	(dB)	≥55
	fiber linker	/	LC/APC
RF characteristic	Bandwidth/flatness	MHz/dB	47-1000/≤±1
	output level	dBuv	82/76/70±1/(-2~--9/-12/-15dBm)
	output level adjustment	dB	0~-18
	reflection loss	dB	≥14(75Ω characteristic impedance)
	RF output interface	/	Metric (one way output)
	CNR/MER	dB	≥44/34(PAL-D 60CH,OMI3.8%,-9dBm)
	CTB/CSO/HUM	dB	≥65/≥60/≥60(-1dBm receive)
Other requirement	power supply/consumption	V/W	External AC155~255V→DC12,/5
	working/storage temperature	ºC	-35~50/-40~75(humidity 5~90%)
	size	mm	130×60×22

 

3. Direction for Use

3.1 Power Input

POWER IN:It is the external power supply input port, First should be the DC+12 V external voltage stabilizer output line connected to the device POWER IN,than put DC+12V external mano-stat insert 100/240 V,DC12V Face posted power light, show power part is regularly working.

3.2 Optical Fiber Input

OPTICAL IN:It is input interface of optical signal,In optical access should clean APC TOP by alcohol ,than align adapter sunken mouth,fiber mouth march link;When optical signal accesses (≥-15dBm) then lights on in panel, which shows optical part is regularly working;ONU is 1490/1310nm connection interface, please do not take off the cover before you use.

3.3 RF Output Level Adjustment

RF OUT:It is RF output port,when optical input -2~-9/-12/-15dBm,RF output 82/76/70dBuv±1;ADJ:it is RF Output level attenuator, default value is the minimum.When the output level and the design requirements has any deviation, it can adjust the attenuation amount, with the design requirements.This device is low optical power receive, suggest-12 ~-9 dBm advisable.

4. Install Test Matter Need Attention

4.1.This device is indoor type structure,Not to be used in place of harassment by the rain;Packed in the box of the indoor appropriate space,For cooling;The output of the cable shielding network must be grounded,Grounding resistance should be less than 4 Ω,The local power supply for electrical shell has to be grounded,Above ground resistance.

4.2.Tail fiber input and output cable has to be reserved certain length,Reduce accident's occurrence; optical interface do not move if not use, This device is with SC/APC,do not link with SC/PC.

5. Attachment

Outlay power supply, AC100~240V  DC12V  500mA  1 PCS

Pictures: